H3C S6550X-HI Series Command Reference Manual page 1883

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
slot slot-number
Examples
# Display PBR configuration and statistics on VLAN-interface 2.
<Sysname> display ip policy-based-route interface vlan-interface 2
Policy based routing information for interface Vlan-interface2:
Policy name: aaa
node 0 deny:
Matches: 0, bytes: 0
node 1 permit:
if-match acl 3999
Matches: 0, bytes: 0
node 2 permit:
if-match acl 2000
apply next-hop 2.2.2.2
Matches: 0, bytes: 0
node 5 permit:
if-match acl 3101
apply next-hop 1.1.1.1
Matches: 0, bytes: 0
Total matches: 0, total bytes: 0
Table 3 Command output
Field
Policy based routing information
for interface XXXX
node 0 deny
node 2 permit
if-match acl
apply next-hop
apply output-interface
: Specifies the slot number of the device, which is fixed at 1.
Description
PBR configuration and statistics on the interface.
This field displays failed in brackets if none of the nodes in the policy
has been successfully issued to the driver.
Match mode of the node, permit or deny.
If a node fails to be issued to the driver, the command displays the
cause in brackets, which include:
•
not support—The device does not support the match criteria
configured on the node.
•
no resource—No sufficient resources (for example, ACLs) are
available for the node.
Compares packets with the ACL.
Specifies a next hop for permitted packets.
Specifies an output interface and its associated track entry for
permitted packets.
This field displays the interface status in brackets.
•
up—The interface is up.
: Specifies an interface by its type and number.
7