Field
Remote address
Transform set
IPsec SA local duration(time based)
IPsec SA local duration(traffic
based)
SA idle time
Related commands
ipsec { ipv6-policy | policy } isakmp template
display ipsec profile
Use
display ipsec profile
Syntax
display ipsec profile [ profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
profile-name
characters.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec profiles.
Examples
# Display information about all IPsec profiles.
<Sysname> display ipsec profile
-------------------------------------------
IPsec profile: myprofile
Mode: isakmp
-------------------------------------------
Transform set:
IKE profile: profile
SA duration(time based): 3600 seconds
SA duration(traffic based): 1843200 kilobytes
SA soft-duration buffer(time based): 1000 seconds
SA soft-duration buffer(traffic based): 43200 kilobytes
SA idle time: 100 seconds
-----------------------------------------------
Description
Remote end IP address of the IPsec tunnel.
Transform set used by the IPsec policy template.
Time-based IPsec SA lifetime, in seconds.
Traffic-based IPsec SA lifetime, in Kilobytes.
Idle timeout of the IPsec SA, in seconds.
If the IPsec SA idle timeout is not configured, this field displays two
consecutive hyphens (--).
to display information about IPsec profiles.
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
tran1
10