H3C S6550X-HI Series Command Reference Manual page 2157

Parameters
match-criteria
Table 2 Available match criteria
Option
acl [ ipv6 | mac ]
name acl-name
|
any
customer-dot1p dot1p-value
customer-vlan-id
vlan-id-list
destination-mac mac-address
dscp dscp-value
ip-precedence
ip-precedence-value
protocol protocol-name
service-dot1p dot1p-value
: Specifies a match criterion.
acl-number
{
}
Table 2 shows the available match criteria.
Description
Matches an ACL.
acl-number
The value range for the
follows:
•
2000 to 3999 for IPv4 ACLs.
•
2000 to 3999 for IPv6 ACLs.
•
4000 to 4999 for Layer 2 MAC ACLs.
The acl-name argument is a case-insensitive string of 1 to
63 characters, which must start with an English letter. To
avoid confusion, make sure the argument is not all.
If no VPN instance is specified in an ACL rule, the ACL rule
takes effect on both non-VPN packets and VPN packets.
Matches all packets.
Matches 802.1p priority values in inner VLAN tags of
double-tagged packets.
dot1p-value
The argument specifies an 802.1p priority
value in the range of 0 to 7.
Matches VLAN IDs in inner VLAN tags of double-tagged
packets.
vlan-id-list
The argument specifies a
space-separated list of up to 10 VLAN items. Each item
specifies a VLAN or a range of VLANs in the form of
vlan-id1 to vlan-id2
must be greater than or equal to the value for
vlan-id
The value range for the
Matches a destination MAC address.
This option takes effect only on Ethernet interfaces.
Matches DSCP values.
dscp-value
The argument specifies a DSCP value. The
dscp-value
value range for the
keywords shown in Table
Matches IP precedence values.
ip-precedence-value
The
precedence value in the range of 0 to 7.
Matches a protocol.
protocol-name
The
Matches 802.1p priority values in outer VLAN tags.
dot1p-value
The argument specifies an 802.1p priority
value in the range of 0 to 7.
3
argument is as
vlan-id2
. The value for
vlan-id1
argument is 1 to 4094.
argument is 0 to 63 or
4.
argument specifies an IP
argument can be ip or ipv6.
.