H3C S6550X-HI Series Command Reference Manual page 2341

[Sysname-ikev2-proposal-1] dh group1
Related commands
ikev2 proposal
display ikev2 policy
Use
display ikev2 policy
Syntax
display ikev2 policy [ policy-name | default ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name
characters.
: Specifies the default IKEv2 policy.
default
Usage guidelines
If you do not specify any parameters, this command displays the configuration of all IKEv2 policies.
Examples
# Display the configuration of all IKEv2 policies.
<Sysname> display ikev2 policy
IKEv2 policy: 1
Priority: 100
Match local address: 1.1.1.1
Match local address ipv6: 1:1::1:1
Match VRF: vpn1
Proposal: 1
Proposal: 2
IKEv2 policy: default
Match VRF: any
Proposal: default
Table 1 Command output
Field
IKEv2 policy
Priority
Match local address
Match local address ipv6
Match VRF
Proposal
to display the IKEv2 policy configuration.
: Specifies an IKEv2 policy by its name, a case-insensitive string of 1 to 63
Description
Name of the IKEv2 policy.
Priority of the IKEv2 policy.
IPv4 address to which the IKEv2 policy can be applied.
IPv6 address to which the IKEv2 policy can be applied.
VPN instance to which the IKEv2 policy can be applied.
IKEv2 proposal that the IKEv2 policy uses.
7