H3C S6550X-HI Series Command Reference Manual page 1880

Syntax
description text
undo description
Default
No description is configured for a policy node.
Views
Policy node view
Predefined user roles
network-admin
Parameters
: Specifies a description, a case-sensitive string of 1 to 127 characters.
text
Examples
# Configure the description as Officeuse for policy node 1.
<Sysname> system-view
[Sysname] policy-based-route 1 permit node 1
[Sysname-pbr-1-1] description Officeuse
display ip policy-based-route
Use
display ip policy-based-route
Syntax
display ip policy-based-route [ policy policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy policy-name
If you do not specify a policy, this command displays information for all PBR policies.
Examples
# Display all policy information.
<Sysname> display ip policy-based-route
Policy name: aaa
node 1 permit:
if-match acl 2000
apply next-hop 1.1.1.1
Table 1 Command output
Field
node 1 permit
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.
Description
The match mode of Node 1 is permit.
4
to display PBR policy information.