H3C S6550X-HI Series Command Reference Manual page 2029

nssatranslator-status-change
changes.
virtif-bad-pkt
virtif-cfg-error
virtif-state-change
virtgrhelper-status-change
changes of a virtual interface.
virtneighbor-state-change
virtual interface.
Examples
# Disable SNMP notifications for OSPFv3.
<Sysname> system-view
[Sysname] undo snmp-agent trap enable ospfv3
spf-schedule-interval
Use
spf-schedule-interval
Use
undo spf-schedule-interval
Syntax
spf-schedule-interval
[ incremental-interval [ conservative ] ] ] | millisecond interval }
undo spf-schedule-interval
Default
The maximum SPF calculation interval is 5 seconds, the minimum interval is 50 milliseconds, and
the incremental interval is 200 milliseconds.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
maximum-interval
to 60 seconds.
minimum-interval
to 60000 milliseconds.
incremental-interval
range of 10 to 60000 milliseconds.
conservative
route flapping occurs. If you do not specify this keyword, OSPFv3 will calculate routes at the
minimum intervals after it has performed route calculation three times at the maximum intervals
consecutively.
millisecond interval
milliseconds. The value range for the
: Specifies notifications about error messages received on a virtual interface.
: Specifies notifications about error configuration of a virtual interface.
: Specifies notifications about virtual interface state changes.
: Specifies notifications about neighbor GR helper state
: Specifies notifications about the neighbor state changes of a
to set the OSPFv3 SPF calculation interval.
{
: Specifies the maximum OSPFv3 route calculation interval in the range of 1
: Specifies the minimum OSPFv3 route calculation interval in the range of 10
: Specifies the incremental OSPFv3 route calculation interval in the
: Performs OSPFv3 route calculation at the maximum intervals when an OSPFv3
: Performs OSPFv3 route calculation at the specified intervals in
interval
: Specifies notifications about NSSA translator state
to restore the default.
maximum-interval
argument is 0 to 1000.
95
[ minimum-interval