H3C S6550X-HI Series Command Reference Manual page 1989

Table 31 Command output
Field
Virtual-link Neighbor-ID
Neighbor-State
Interface
Cost
State
Type
Transit Area
Timers
Transmit delay
IPsec profile name: profile001,
inherited
Keychain authentication:
Enabled (test), inherited
distribute bgp-ls
Use
distribute bgp-ls
Use
undo distribute bgp-ls
Syntax
distribute bgp-ls [ instance-id instance-id ]
undo distribute bgp-ls
Default
OSPFv3 link state information cannot be advertised to BGP.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
instance-id
instance, this command advertises OSPFv3 link state information of instance 0 to BGP.
Usage guidelines
After the device advertises OSPFv3 link state information to BGP, BGP can advertise the information
for intended applications. For more information about BGP LS, see BGP configuration in Layer 3—IP
Routing Configuration Guide.
This command does not apply to OSPFv3 processes in a VPN instance.
Description
ID of the neighbor on the virtual link.
Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, or Full.
Number and name of the local interface on the virtual link.
Interface route cost.
Interface state.
Virtual link.
Transit area ID. This field is displayed when a virtual link is present on the
interface.
Values of OSPFv3 timers (in seconds): Hello, Dead, and Retransmit.
LSA transmission delay on the interface, in seconds.
IPsec profile profile001 is applied to the virtual link. The inherited
attribute indicates that the virtual link is using the IPsec profile specified
for the backbone area.
Keychain authentication is enabled for the virtual link, and the keychain
test is used. The inherited attribute indicates that the virtual link is using
the authentication mode specified for the backbone area.
to advertise OSPFv3 link state information to BGP.
to restore the default.
: Specifies an instance by its ID in the range of 0 to 65535. If you do not specify an
55