H3C S6550X-HI Series Command Reference Manual page 2059

Views
Routing policy node view
Predefined user roles
network-admin
Parameters
site-of-origin&<1-32>
characters.
attributes.
An SoO attribute has the following forms:
•
16-bit AS number:32-bit self-defined number, for example, 101:3. The AS number is in the
range of 0 to 65535, and the self-defined number is in the range of 0 to 4294967295.
•
32-bit IP address:16-bit self-defined number, for example, 192.168.122.15:1. The self-defined
number is in the range of 0 to 65535.
•
32-bit AS number:16-bit self-defined number, for example, 70000:3. The AS number is in the
range of 65536 to 4294967295, and the self-defined number is in the range of 0 to 65535.
•
32-bit IP address/IPv4 address mask length:16-bit user-defined number, for example,
192.168.122.15/24:1.
•
32-bit AS number in dotted format:16-bit user-defined number, for example, 65535.65535:1.
additive
not specify this keyword, the specified SoO attribute replaces the original SoO attribute of BGP
routes.
Examples
# Configure node 10 in permit mode for routing policy policy1 to add the SoO extended community
attribute 1:100 to BGP routes matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply extcommunity soo 1:100 additive
apply ip-precedence
Use
apply ip-precedence
Use
undo apply ip-precedence
Syntax
apply ip-precedence { value | clear }
undo apply ip-precedence
Default
No IP precedence is set.
Views
Routing policy node view
Predefined user roles
network-admin
: Sets the SoO extended community attribute, a string of 3 to 24
indicates that you can specify a maximum of 32 SoO extended community
&<1-32>
: Adds the specified SoO attribute to the original SoO attribute of BGP routes. If you do
to set an IP precedence for matching routes.
to restore the default.
7