H3C S6550X-HI Series Command Reference Manual page 2256

Related commands
ipsec { ipv6-policy | policy }
ipsec { ipv6-policy-template | policy-template }
Use
ipsec { ipv6-policy-template | policy-template }
template entry and enter its view, or enter the view of an existing IPsec policy template entry.
Use
undo ipsec { ipv6-policy-template | policy-template }
policy template.
Syntax
ipsec { ipv6-policy-template | policy-template } template-name seq-number
undo ipsec { ipv6-policy-template | policy-template } template-name
[ seq-number ]
Default
No IPsec policy templates exist.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy-template
policy-template
template-name
63 characters.
seq-number
65535. A smaller number indicates a higher priority.
Usage guidelines
The configurable parameters for an IPsec policy template are similar to the parameters that you use
when you configure an IKE-based IPsec policy. However, all parameters except for the IPsec
transform sets and the IKE peer are optional for an IPsec policy template.
An IPsec policy template is a set of IPsec policy template entries that have the same name but
different sequence numbers.
With the
seq-number
entry.
An IPv4 IPsec policy template and an IPv6 IPsec policy template can have the same name.
Examples
# Create an IPsec policy template entry and enter the IPsec policy template view. The template
name is template1 and the sequence number is 100.
<Sysname> system-view
[ ]
Sysname
[
Sysname-ipsec-policy-template-template1-100
Related commands
display ipsec { ipv6-policy-template | policy-template }
: Specifies an IPv6 IPsec policy template.
: Specifies an IPv4 IPsec policy template.
: Specifies a name for the IPsec policy template, a case-insensitive string of 1 to
: Specifies a sequence number for the IPsec policy template entry, in the range of 1 to
argument specified, the
ipsec policy-template template1 100
command deletes an IPsec policy template
undo
]
31
to create an IPsec policy
to delete an IPsec