H3C S6550X-HI Series Command Reference Manual page 2078

is-is-level-2
nssa-external-type2 } *
undo if-match
-
external
is-is-level-1
nssa-external-type1or2 | nssa-external-type2 ] *
Default
No route-type match criterion is set.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
eigrp-external
eigrp-internal
external-type1
external-type1or2
external-type2
: Matches OSPF internal routes (including OSPF intra-area and inter-area routes).
internal
is-is-level-1
is-is-level-2
nssa-external-type1
nssa-external-type1or2
nssa-external-type2
Examples
# Configure node 10 in permit mode for routing policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match route-type internal
if-match rpki
Use
if-match rpki
Use undo if-match rpki
Syntax
if-match rpki { invalid | not-found | valid }
undo if-match rpki
Default
No BGP RPKI validation state match criterion is set.
| nssa-external-type1
route-type
type1 | external-type1or2
| is-is-level-2
: Matches EIGRP external routes.
: Matches EIGRP internal routes.
: Matches OSPF Type 1 external routes.
: Matches OSPF Type 1 and Type 2 external routes.
: Matches OSPF Type 2 external routes.
: Matches IS-IS Level-1 routes.
: Matches IS-IS Level-2 routes.
: Matches OSPF NSSA Type 1 external routes.
: Matches OSPF NSSA Type 1 and 2 external routes.
: Matches OSPF NSSA Type 2 external routes.
to set the BGP RPKI validation state match criterion.
to restore the default.
| nssa-external-type1or2
[ eigrp-external
| external-type2
|
26
| eigrp-internal
| internal |
nssa-external-type1
|
|
|