H3C S6550X-HI Series Command Reference Manual page 1928

Usage guidelines
If you set the RIPng packet sending rate for both a RIPng process and an interface running the
RIPng process, the configuration on the interface takes effect.
Examples
# Configure VLAN-interface 100 to send a maximum of six RIPng packets every 30 milliseconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng output-delay 30 count 6
Related commands
output-delay
ripng poison-reverse
Use
ripng poison-reverse
Use
undo ripng poison-reverse
Syntax
ripng poison-reverse
undo ripng poison-reverse
Default
Poison reverse is disabled.
Views
Interface view
Predefined user roles
network-admin
Examples
# Enable poison reverse for RIPng update messages on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng poison-reverse
ripng primary-path-detect bfd echo
Use
ripng primary-path-detect bfd echo
RIPng FRR.
Use
undo ripng primary-path-detect bfd
RIPng FRR.
Syntax
ripng primary-path-detect bfd echo
undo ripng primary-path-detect bfd
Default
BFD single-hop echo detection is disabled for RIPng FRR.
to enable poison reverse.
to disable poison reverse.
to enable BFD single-hop echo detection for
to disable BFD single-hop echo detection for
22