H3C S6550X-HI Series Command Reference Manual page 2183

Default
No QoS policy is applied to a VLAN.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name
vlan vlan-id-list
range in the form of
equal to the value for
: Applies the QoS policy to incoming packets.
inbound
: Applies the QoS policy to outgoing packets.
outbound
Examples
# Apply QoS policy test to the incoming traffic of VLAN 200, VLAN 300, VLAN 400, and VLAN 500.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 inbound
reset qos policy global
Use
reset qos policy global
Syntax
reset qos [ remarking ] policy global [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
Parameters
remarking
inbound : Clears the statistics of the global QoS policy applied to incoming traffic globally.
: Clears the statistics of the global QoS policy applied to outgoing traffic globally.
outbound
Usage guidelines
If you do not specify the
policies.
If you do not specify a direction, this command clears the statistics of the global QoS policies in both
directions.
Examples
# Clear the statistics of the generic QoS policy applied to the incoming traffic globally.
<Sysname> reset qos policy global inbound
: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.
: Specifies a space-separated list of up to eight VLAN IDs or a VLAN ID
vlan-id1 to vlan-id2
. The value range for the
vlan-id1
: Specifies a marking-type QoS policy.
remarking
. The value for
vlan-id
to clear the statistics of a global QoS policy.
keyword, this command clears statistics for generic QoS
29
must be greater than or
vlan-id2
argument is 1 to 4094.