H3C S6550X-HI Series Command Reference Manual page 1931

Views
RIPng view
Predefines user roles
network-admin
Parameters
maximum-interval
of 1 to 5 seconds.
minimum-interval
10 to 5000 milliseconds.
incremental-interval
range of 100 to 1000 milliseconds.
Usage guidelines
The minimum interval and the incremental interval cannot be greater than the maximum interval.
For a stable network, the minimum interval is used. If network changes become frequent, the
incremental interval
interval until the
Examples
# Set the maximum, minimum, and incremental intervals for sending triggered updates to 2 seconds,
100 milliseconds, and 100 milliseconds, respectively.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] timer triggered 2 100 100
timers
Use
timers
Use
undo timers
Syntax
timers { garbage-collect garbage-collect-value | suppress suppress-value
| timeout timeout-value | update update-value } *
undo timers { garbage-collect | suppress | timeout | update } *
Default
The garbage-collect timer is 120 seconds, the suppress timer is 120 seconds, the timeout timer is
180 seconds, and the update timer is 30 seconds.
Views
RIPng view
Predefines user roles
network-admin
Parameters
garbage-collect-value
suppress-value
timeout-value
: Specifies the maximum interval for sending triggered updates, in the range
: Specifies the minimum interval for sending triggered updates, in the range of
: Specifies the incremental interval for sending triggered updates, in the
incremental-interval
maximum-interval
to set RIPng timers.
to restore the default.
: Sets the garbage-collect timer in the range of 1 to 86400 seconds.
: Sets the suppress timer in the range of 0 to 86400 seconds.
: Sets the timeout timer in the range of 1 to 86400 seconds.
is used to increase the triggered update sending
is reached.
25