H3C S6550X-HI Series Command Reference Manual page 1915

enable ipsec-profile
Use
enable ipsec-profile
Use
undo enable ipsec-profile
Syntax
enable ipsec-profile profile-name
undo enable ipsec-profile
Default
No IPsec profile is applied to a RIPng process.
Views
RIPng view
Predefined user roles
network-admin
Parameters
profile-name
characters.
Usage guidelines
To configure an IPsec profile, see IPsec in Security Configuration Guide.
Examples
# Apply IPsec profile profile001 to RIPng process 1.
<Sysname> system-view
[Sysname] ripng 1
[Sysname-ripng-1] enable ipsec-profile profile001
fast-reroute
Use
fast-reroute
Use
undo fast-reroute
Syntax
fast-reroute route-policy route-policy-name
undo fast-reroute
Default
RIPng FRR is disabled.
Views
RIPng view
Predefined user roles
network-admin
Parameters
route-policy route-policy-name
string of 1 to 63 characters.
to apply an IPsec profile to a RIPng process.
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
to configure RIPng FRR.
to disable RIPng FRR.
to remove the IPsec profile from the RIPng process.
: Specifies a routing policy by its name, a case-sensitive
9