H3C S6550X-HI Series Command Reference Manual page 1853

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp-default] peer 1.1.1.1 route-mode adj-rib-in pre-policy
peer soo
Use
peer soo
Use
undo peer soo
Syntax
peer { group-name
[ prefix-length ] } soo site-of-origin
undo peer { group-name | ipv4-address [ mask-length ] | ipv6-address
[ prefix-length ] } soo
Default
No SoO attribute is configured for a peer or peer group.
Views
BGP IPv4 unicast address family view
BGP-VPN IPv4 unicast address family view
BGP IPv6 unicast address family view
BGP-VPN IPv6 unicast address family view
Predefined user roles
network-admin
Parameters
group-name
peer group must have been created.
ipv4-address
mask-length
and
mask-length
configures the SoO attribute for all dynamic peers in the subnet.
ipv6-address
prefix-length
ipv6-address
subnet, this command configures the SoO attribute for all dynamic peers in the subnet.
site-of-origin
has the following formats:
•
16-bit AS number:32-bit user-defined number. For example, 100:3.
•
32-bit IP address:16-bit user-defined number. For example, 192.168.122.15:1.
•
32-bit AS number:16-bit user-defined number, where the minimum value of the AS number is
65536. For example, 65536:1.
•
32-bit IP address/IPv4 address mask length:16-bit user-defined number. For example,
192.168.122.15/24:1.
•
32-bit AS number in dotted format:16-bit user-defined number. For example, 65535.65535:1.
to configure the Site of Origin (SoO) attribute for a BGP peer or peer group.
to remove the configuration.
| ipv4-address
: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The
: Specifies a peer by its IPv4 address. The peer must have been created.
: Specifies a mask length in the range of 0 to 32. You can use the
arguments together to specify a subnet. If you specify a subnet, this command
: Specifies a peer by its IPv6 address. The peer must have been created.
: Specifies a prefix length in the range of 0 to 128. You can use the
and
prefix-length
: Specifies the SoO attribute, a string of 3 to 24 characters. The SoO attribute
[ mask-length
arguments together to specify a subnet. If you specify a
49
] | ipv6-address
ipv4-address