H3C S6550X-HI Series Command Reference Manual page 1963

Syntax
display ospfv3 [ process-id ] interface [ interface-type interface-number
| verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
interface-type interface-number
: Displays detailed information about all OSPFv3 interfaces.
verbose
Usage guidelines
If you do not specify a process, this command displays brief OSPFv3 interface information for all
processes.
If you do not specify the
keyword, this command displays brief information about all OSPFv3 interfaces.
Examples
# Display OSPFv3 information about VLAN-interface 1.
<Sysname> display ospfv3 interface vlan-interface 1
Area: 0.0.0.0
-------------------------------------------------------------------------
Vlan-interface1 is up, line protocol is up
Interface ID 65697
IPv6 prefixes
FE80::200:12FF:FE34:1
2001::1
Cost: 1
Priority: 1
Designated router: 2.2.2.2
Backup designated router: 1.1.1.1
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit delay 1
FRR backup: Enabled
FRR TI-LFA: Enabled
Neighbor count is 1, Adjacent neighbor count is 1
Primary path detection mode: BFD echo
IPsec profile name: profile002, inherited
Keychain authentication: Enabled (test), inherited
BFD: control
Exchanging/Loading neighbors: 0
Wait timer: Off,
Prefix-suppression is enabled
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
interface-type interface-number
OSPFv3 Process 1 with Router ID 1.1.1.1
Instance ID 0
(Link-Local address)
State: BDR
LsAck timer: Off
: Specifies an interface by its type and number.
Type: Broadcast
29
argument or the
MTU: 1500
verbose