H3C S6550X-HI Series Command Reference Manual page 2006

Examples
# Set the maximum number of ECMP routes to 2.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] maximum load-balancing 2
Related commands
max-ecmp-num
nssa
Use to configure an area as an NSSA area.
nssa
Use
undo nssa
Syntax
nssa [
route-policy route-policy-name | tag tag | type type ] * | no-import-route
| no-summary | [ translate-always | translate-never ] | suppress-fa |
translator-stability-interval value ] *
undo nssa
Default
No area is configured as an NSSA area.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
default-route-advertise
NSSA ABR, the ABR redistributes a default route in a Type-7 LSA into the NSSA area. It
redistributes a default route regardless of whether a default route exists in the routing table. If it is
configured on an ASBR, the ASBR redistributes a default route in a Type-7 LSA only when the
default route exists in the routing table.
cost cost-value
not specify this option, the default cost specified by the
nssa-only
LSAs to 0. If you do not specify this keyword, the P-bit of Type-7 LSAs is set to 1. If the router acts as
both an ASBR and an ABR and FULL state neighbors exist in the backbone area, the P-bit is set to
0.
route-policy route-policy-name
string of 1 to 63 characters. When the specified routing policy is matched, the command redistributes
a default route in a Type-7 LSA into the OSPFv3 routing domain. The routing policy modifies values
in the Type-7 LSA.
: Specifies a tag for the default route, in the range of 0 to 4294967295.
tag tag
type type
no-import-route
redistribute routes into the NSSA area.
to restore the default.
default-route-advertise
: Used on an NSSA ABR or an ASBR only. If it is configured on an
: Specifies a cost for the default route, in the range of 0 to 16777214. If you do
: Limits the default route advertisement to the NSSA area by setting the P-bit of Type-7
: Specifies a type for the Type-7 LSA, 1 or 2. The default is 2.
: Used on an NSSA ABR to control the
[ cost cost-value
default-cost
: Specifies a routing policy by its name, a case-sensitive
72
| nssa-only
command applies.
command to not
import-route
|