H3C S6550X-HI Series Command Reference Manual page 2012

Usage guidelines
An interface enabled with LFA can be selected as a backup interface. After you disable LFA on the
interface, it cannot be selected as a backup interface.
Examples
# Disable VLAN-interface 11 from calculating a backup next hop by using the LFA algorithm.
<Sysname> system-view
[Sysname] interface vlan-interface 11
[Sysname-Vlan-interface11] ospfv3 fast-reroute lfa-backup exclude
ospfv3 ipsec-profile
Use
ospfv3 ipsec-profile
Use
undo ospfv3 ipsec-profile
Syntax
ospfv3 ipsec-profile profile-name [ instance instance-id ]
undo ospfv3 ipsec-profile [ instance instance-id ]
Default
No IPsec profile is applied to an OSPFv3 interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
profile-name
characters.
instance instance-id
is 0.
Usage guidelines
An IPsec profile must be specified in this command. For more information about IPsec profiles, see
IPsec configuration in Security Configuration Guide.
Examples
# Apply IPsec profile profile001 to VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 ipsec-profile profile001
ospfv3 mib-binding
Use
ospfv3 mib-binding
Use
undo ospfv3 mib-binding
Syntax
ospfv3 mib-binding process-id
to apply an IPsec profile to an OSPFv3 interface.
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
: Specifies an instance by its ID in the range of 0 to 255. The default ID
to bind MIB to an OSPFv3 process.
to restore the default.
to remove the IPsec profile from the OSPFv3 interface.
78