H3C S6550X-HI Series Command Reference Manual page 2365

[Sysname] ikev2 profile profile1
# Apply IKEv2 profile profile1 to the interface whose IP address is 2.2.2.2.
[Sysname-ikev2-profile-profile1] match local address 2.2.2.2
Related commands
match remote
match local address (IKEv2 policy view)
Use
match local address
matches.
Use
undo match local address
policy matches.
Syntax
match local address { interface-type interface-number | ipv4-address | ipv6
ipv6-address }
undo match local address { interface-type interface-number | ipv4-address
| ipv6 ipv6-address }
Default
No local interface or local address is specified, and the IKEv2 policy matches any local interface or
local address.
Views
IKEv2 policy view
Predefined user roles
network-admin
Parameters
interface-type interface-number
can be any Layer 3 interface.
ipv4-address
ipv6 ipv6-address
Usage guidelines
IKEv2 policies with this command configured are looked up before those that do not have this
command configured.
Examples
# Configure IKEv2 policy policy1 to match local address 3.3.3.3.
<Sysname> system-view
[Sysname] ikev2 policy policy1
[Sysname-ikev2-policy-policy1] match local address 3.3.3.3
Related commands
display ikev2 policy
match vrf
to specify a local interface or a local address that an IKEv2 policy
: Specifies the IPv4 address of a local interface.
: Specifies the IPv6 address of a local interface.
to remove a local interface or a local address that an IKEv2
: Specifies a local interface by its type and number. It
31