H3C S6550X-HI Series Command Reference Manual page 1904

Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance s-vpn-instance-name
name, a case-sensitive string of 1 to 31 characters. Each VPN instance has its own routing table,
and the configured IPv6 static route is installed in the routing tables of the specified VPN instances.
ipv6-address prefix-length
interface-type interface-number
the output interface is a non-P2P interface (for example, an NBMA interface or broadcast interface),
the next hop address must be specified.
next-hop-address
recursive-lookup longest-match
recursion.
: Enables BFD to detect reachability of the static route's next hop. For more information about
bfd
BFD, see High Availability Configuration Guide.
control-packet
echo-packet
bfd-source ipv6-address
permanent
down, the permanent IPv6 static route is still active.
track track-entry-number
number in the range of 1 to 1024. For more information about Track, see High Availability
Configuration Guide.
: Indicates the next hop is on the public network.
public
vpn-instance d-vpn-instance-name
name, a case-sensitive string of 1 to 31 characters. If a destination VPN is specified, packets will
search for the output interface based on the specified next hop (IPv6 address) for the static route.
preference preference
The default is 60.
tag tag-value
default is 0. Tags of routes are used for route control in routing policies. For more information about
routing policies, see Layer 3—IP Routing Configuration Guide.
description text
characters, including special characters such as the space, but excluding the question mark (?).
Usage guidelines
An IPv6 static route that has the destination address configured as ::/0 (a prefix length of 0) is the
default IPv6 route. If the destination address of an IPv6 packet does not match any entry in the
routing table, this default route is used to forward the packet.
Follow these guidelines to configure the output interface, next hop address, or both for a static route:
•
If the output interface is a broadcast interface or an NBMA interface, the next hop address must
be specified.
: Specifies the next hop IPv6 address.
: Specifies the BFD control packet mode.
: Specifies the BFD echo packet mode.
: Specifies the source IPv6 address of BFD packets.
: Specifies the IPv6 route as a permanent IPv6 static route. If the output interface is
: Associates the IPv6 static route with a track entry specified by its
: Specifies a preference for IPv6 static routes, in the range of 1 to 255.
: Sets a tag for marking the static route, in the range of 1 to 4294967295. The
: Configures a description for the IPv6 static route, a string of 1 to 60
: Specifies a source MPLS L3VPN instance by its
: Specifies the IPv6 address and prefix length.
: Specifies an output interface by its type and number. If
: Specifies the longest match principle for static route
: Specifies a destination MPLS L3VPN instance by its
12