H3C S6550X-HI Series Command Reference Manual page 2004

log-peer-change
Use
log-peer-change
Use
undo log-peer-change
Syntax
log-peer-change
undo log-peer-change
Default
Logging for neighbor state changes is enabled.
Views
OSPFv3 view
Predefined user roles
network-admin
Usage guidelines
This feature enables the device to deliver logs about neighbor state changes to its information center.
The information center processes logs according to user-defined output rules (whether and where to
output logs). For more information about the information center, see information center configuration
in System Management Configuration Guide.
Examples
# Disable logging for neighbor state changes for OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
lsa-generation-interval
Use
lsa-generation-interval
Use
undo lsa-generation-interval
Syntax
lsa-generation-interval
[ incremental-interval ] ]
undo lsa-generation-interval
Default
The maximum interval is 5 seconds, the minimum interval is 0 milliseconds, and the incremental
interval is 0 milliseconds.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
maximum-interval
60 seconds.
to enable logging for neighbor state changes.
to disable logging for neighbor state changes.
to set the OSPFv3 LSA generation interval.
maximum-interval
: Specifies the maximum OSPFv3 LSA generation interval in the range of 1 to
70
to restore the default.
[ minimum-interval