H3C S6550X-HI Series Command Reference Manual page 2358

Use
undo ikev2 keychain
Syntax
ikev2 keychain keychain-name
undo ikev2 keychain keychain-name
Default
No IKEv2 keychains exist.
Views
System view
Predefined user roles
network-admin
Parameters
keychain-name
case-insensitive string of 1 to 63 characters and cannot contain a hyphen (-).
Usage guidelines
An IKEv2 keychain is required on both ends if either end uses preshared key authentication. The
preshared key configured on both ends must be the same.
You can configure multiple IKEv2 peers in an IKEv2 keychain.
Examples
# Create an IKEv2 keychain named key1 and enter IKEv2 keychain view.
<Sysname> system-view
[Sysname] ikev2 keychain key1
[Sysname-ikev2-keychain-key1]
ikev2 nat-keepalive
Use
ikev2 nat-keepalive
Use undo ikev2 nat-keepalive
Syntax
ikev2 nat-keepalive seconds
undo ikev2 nat-keepalive
Default
The NAT keepalive interval is 10 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies the NAT keepalive interval in seconds, in the range of 5 to 3600.
seconds
to delete an IKEv2 keychain.
: Specifies a name for the IKEv2 keychain. The keychain name is a
to set the NAT keepalive interval.
to restore the default.
24