H3C S6550X-HI Series Command Reference Manual page 1912

Field
Poison-reverse
MetricIn/MetricOut
Default route
Update output delay
Output count
Default route cost
Primary path detection mode
display ripng neighbor
Use
display ripng neighbor
Syntax
display ripng process-id neighbor [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
interface-type interface-number
not specify this argument, the command displays information about all neighbors for the RIPng
process.
Examples
# Display neighbor information for RIPng process 1.
<Sysname> display ripng 1 neighbor
Neighbor Address: FE80::230:FF:FE00:0
Interface
Version
Bad packets: 0
: Specifies a RIPng process by its ID in the range of 1 to 65535.
: Vlan-interface1
: RIPng version 1
Description
Indicates whether poison reverse is enabled:
•
On—Enabled.
•
Off—Disabled.
Additional metric to incoming and outgoing routes.
•
Only—The interface advertises only a default route.
•
Originate—The interface advertises a default route and
other RIPng routes.
•
Off—In this state, the interface does not advertise a
default route.
•
In garbage-collection status—In this state, the
interface advertises a default route with a metric of 16.
RIPng packet sending interval, in milliseconds.
Maximum number of RIPng packets that an interface can
send at each interval.
Cost of the default route.
BFD echo indicates that BFD single-hop echo detection is
used to detect primary link failures.
to display neighbor information for a RIPng process.
: Specifies an interface by its type and number. If you do
Last update: 00h00m27s
Bad routes : 0
6