H3C S6550X-HI Series Command Reference Manual page 2194

network-operator
Parameters
interface-type interface-number
not specify an interface, this command displays the rate limit configuration for all interfaces.
Examples
# Display the rate limit configuration and statistics for all interfaces.
<Sysname> display qos lr interface
Interface: Twenty-FiveGigE1/0/1
Direction: Outbound
CIR 2000 (kbps), CBS 20480 (Bytes)
Table 14 Command output
Field
Interface
Direction
CIR
CBS
qos lr
Use
qos lr
Use
undo qos lr
Syntax
qos lr { inbound | outbound } cir committed-information-rate [ cbs
committed-burst-size ]
undo qos lr { inbound | outbound }
Default
No rate limit is configured on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Limits the rate of incoming packets.
inbound
: Limits the rate of outgoing packets.
outbound
cir committed-information-rate
committed-information-rate
cbs committed-burst-size
default is the product of 62.5 and the CIR and must be a multiple of 512. When the product is not a
multiple of 512, it is rounded up to the nearest integral multiple of 512 that is greater than the product.
A default value greater than 134217728 is converted to 134217728.
Description
Interface name, including the interface type and interface number.
Direction in which the rate limit configuration is applied.
CIR in kbps.
CBS in bytes.
to configure rate limiting on an interface.
to delete the rate limit configuration.
: Specifies the CBS in the range of 512 to 134217728 bytes. The
: Specifies an interface by its type and number. If you do
: Specifies the CIR in kbps. The value range for
is 512 to 104857600.
40