H3C S6550X-HI Series Command Reference Manual page 2173

Syntax
display qos policy user-defined [ remarking ] [ policy-name [ classifier
classifier-name ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
user-defined
remarking
policy-name
you do not specify a QoS policy, this command displays all user-defined QoS policies.
classifier classifier-name
to 31 characters. If you do not specify a traffic class, this command displays all traffic classes.
Usage guidelines
If you do not specify the
Examples
# Display all user-defined generic QoS policies.
<Sysname> display qos policy user-defined
User-defined QoS policy information:
Policy: 1 (ID 100)
Classifier: 1 (ID 100)
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 112 (kbps), CBS 51200 (Bytes), EBS 512 (Bytes)
Green action
Yellow action : pass
Red action
Classifier: 2 (ID 101)
Behavior: 2
Accounting enable: Packet
Filter enable: Permit
Marking:
Remark dot1p 4
Classifier: 3 (ID 102)
Behavior: 3
-none-
: Specifies user-defined QoS policies.
: Specifies marking-type QoS policies.
: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters. If
remarking
: pass
: discard
: Specifies a traffic class by its name, a case-sensitive string of 1
keyword, this command displays generic QoS policies.
19