H3C S6550X-HI Series Command Reference Manual page 2276

<Sysname> reset ipsec sa spi 10.1.1.2 ah 256
# Clear all IPsec SAs for remote IP address 10.1.1.2.
<Sysname> reset ipsec sa remote 10.1.1.2
# Clear all IPsec SAs for entry 10 of IPsec policy policy1.
<Sysname> reset ipsec sa policy policy1 10
# Clear all IPsec SAs for IPsec policy policy1.
<Sysname> reset ipsec sa policy policy1
Related commands
display ipsec sa
reset ipsec statistics
Use reset ipsec statistics
Syntax
reset ipsec statistics [ tunnel-id tunnel-id ]
Views
User view
Predefined user roles
network-admin
Parameters
tunnel-id tunnel-id
range for the
command clears all IPsec packet statistics.
Examples
# Clear IPsec packet statistics.
<Sysname> reset ipsec statistics
Related commands
display ipsec statistics
reverse-route dynamic
Use
reverse-route dynamic
Use
undo reverse-route dynamic
Syntax
reverse-route [ next-hop [ ipv6 ] ip-address ] dynamic
undo reverse-route dynamic
Default
IPsec RRI is disabled.
Views
IPsec policy view
IPsec policy template view
: Clears IPsec packet statistics for the specified IPsec tunnel. The value
argument is 0 to 4294967295. If you do not specify this option, the
tunnel-id
to enable IPsec reverse route inject (RRI).
to clear IPsec packet statistics.
to disable IPsec RRI.
51