H3C S6550X-HI Series Command Reference Manual page 2005

minimum-interval
to 60000 milliseconds. The default is 0, which indicates that the minimum interval can be any value.
incremental-interval
range of 10 to 60000 milliseconds.
Usage guidelines
When network changes are infrequent, LSAs are generated at the minimum interval. If network
changes become frequent, the LSA generation interval increases by the incremental interval × 2
for each generation until the maximum interval is reached. The value
times.
The minimum interval and the incremental interval cannot be greater than the maximum interval.
Examples
# Set the maximum LSA generation interval to 2 seconds, minimum interval to 100 milliseconds, and
incremental interval to 100 milliseconds.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] lsa-generation-interval 2 100 100
Related commands
lsa-arrival-interval
maximum load-balancing
Use
maximum load-balancing
routes.
Use
undo maximum load-balancing
Syntax
maximum load-balancing number
undo maximum load-balancing
Default
The maximum number of OSPFv3 ECMP routes equals the maximum number of ECMP routes,
which is configurable by using the
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
: Specifies the maximum number of ECMP routes. When the maximum number is 1,
number
OSPFv3 does not perform load balancing.
Usage guidelines
The maximum value for the
restricted by the maximum number of ECMP routes, which is configurable with the
command. The maximum value is the value for the
specification supported by the device.
: Specifies the minimum OSPFv3 LSA generation interval in the range of 10
: Specifies the OSPFv3 LSA generation incremental interval in the
to set the maximum number of equal-cost multi-path (ECMP)
to restore the default.
max-ecmp-num
argument of the
number
71
is the number of generation
n
command.
maximum load-balancing
command if it is less than the
max-ecmp-num
n-2
command is
max-ecmp-num