H3C S6550X-HI Series Command Reference Manual page 1924

undo ripng [ process-id ]
Default
RIPng is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
process-id
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, the RIPng process
runs on the public network.
Usage guidelines
Before you configure global RIPng parameters, you must create a RIPng process. This restriction
does not apply to configuring interface RIPng parameters.
If you disable a RIPng process, the configured RIPng parameters become invalid.
Examples
# Create RIPng process 100 and enter its view.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100]
ripng default-route
Use
ripng default-route
specified metric.
Use
undo ripng default-route
Syntax
ripng default-route { only | originate } [ cost cost-value | route-policy
route-policy-name ] *
undo ripng default-route
Default
A RIPng process does not advertise a default route.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Advertises only an IPv6 default route (::/0).
only
originate
cost-value
: Specifies a RIPng process by its ID in the range of 1 to 65535. The default value is 1.
to configure a RIPng interface to advertise a default route with a
: Advertises an IPv6 default route (::/0) and other routes.
: Specifies a cost for the default route, in the range of 1 to 15. The default is 1.
: Specifies an MPLS L3VPN instance by its name, a
to disable a RIPng interface from sending a default route.
18