H3C S6550X-HI Series Command Reference Manual page 1944

Current reset type: N/A
Reset prepare message replied: -/-/-/-
Reset process message replied: -/-/-/-
Reset phase of module:
M-N/A, P-N/A, S-N/A, C-N/A, R-N/A
Area: 0.0.0.3
Area flag: NSSA
7/5 translator state: Disabled
7/5 translate stability timer interval: 0
SPF Scheduled Count: 0
ExChange/Loading neighbors: 0
LSA Count: 0
Up interfaces: 0
MTU: 1440
Default cost: 1
Process reset flag: N/A
Current reset type: N/A
Reset prepare message replied: -/-/-/-
Reset process message replied: -/-/-/-
Reset phase of module:
M-N/A, P-N/A, S-N/A, C-N/A, R-N/A
Table 1 Command output
Field
OSPFv3 Process 1 with Router ID 1.1.1.1
Router type
Process state
Route tag
Route tag check
Multi-VPN-Instance
DN-bit check
(MPLS TE not enabled)
Description
OSPFv3 process is 1, and router ID is 1.1.1.1.
Router type:
•
ABR.
•
ASBR.
•
NSSA.
•
Null.
OSPFv3 process state. If you shut down the process by
using the
displays Admin-down. If the process is not shut down, this
field is not displayed.
Tag of the routes redistributed into the OSPFv3 process.
Whether the check is enabled for the route tag in OSPFv3
LSAs of the OSPFv3 process.
Whether the OSPFv3 process supports PE or multiple VPN
instances:
•
Multi-VPN-Instance: Disabled—The process does
not support multiple VPN instances.
•
Multi-VPN-Instance: Enabled—The process
supports multiple VPN instances.
•
PE Router, Multi-VPN-Instance: Enabled—The local
device is a PE.
Whether the check is enabled for the DN bit in OSPFv3
LSAs of the OSPFv3 process.
10
shutdown process
command, this field