H3C S6550X-HI Series Command Reference Manual page 2089

undo apply ip-address next-hop
Default
No next hop is set for IPv4 routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
ip-address
: Specifies the public network.
public
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters.
Usage guidelines
If you use this command to set a next hop for redistributed routes, the configuration does not take
effect.
If you do not specify the
the next hop belongs to the public network.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set next hop 193.1.1.8 for routes
matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply ip-address next-hop 193.1.1.8
display ip prefix-list
Use
display ip prefix-list
Syntax
display ip prefix-list [ name prefix-list-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name prefix-list-name
characters. If you do not specify this option, the command displays statistics for all IPv4 prefix lists.
Examples
# Display the statistics for IPv4 prefix list abc.
<Sysname> display ip prefix-list name abc
Prefix-list: abc
: Specifies the next hop IP address.
keyword and the
public
: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63
: Specifies an MPLS L3VPN instance by its name, a
vpn-instance vpn-instance-name
to display IPv4 prefix list statistics.
37
option,