H3C S6550X-HI Series Command Reference Manual page 1890

Examples
# Enable the PBR logging feature.
<Sysname> system-view
[Sysname] ip policy-based-route-log enable
Related commands
apply next-hop
policy-based-route
policy-based-route
Use
policy-based-route
existing policy node.
Use
undo policy-based-route
Syntax
policy-based-route policy-name [ deny | permit ] node node-number
undo policy-based-route policy-name [ deny | node node-number | permit ]
Default
No policy nodes exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name
: Specifies the match mode for the policy node as deny.
deny
: Specifies the match mode for the policy node as permit (default mode).
permit
node node-number
The value range for the
Usage guidelines
A policy that has been applied to an interface or locally cannot be deleted. To delete it, you must first
cancel the application.
•
If a policy node is specified, the
specified policy node.
•
If a match mode is specified, the command deletes all nodes configured with the match mode.
•
If no policy node or match mode is specified, the command deletes the whole policy.
Examples
# Create permit-mode of Node 10 for policy policy1 and enter its view.
<Sysname> system-view
[Sysname] policy-based-route policy1 permit node 10
[Sysname-pbr-policy1-10]
to create a policy node and enter its view, or enter the view of an
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.
: Specifies a policy node by its number. A smaller number has a higher priority.
node-number
undo policy-based-route
to delete a policy or policy node.
argument is 0 to 255.
14
command deletes the