H3C S6550X-HI Series Command Reference Manual page 2042

Syntax
display
interface-number [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
slot slot-number
Examples
# Display IPv6 PBR configuration and statistics on VLAN-interface 2.
<Sysname> display ipv6 policy-based-route interface vlan-interface 2
Policy based routing information for interface Vlan-inerface2:
Policy name: aaa
node 0 deny:
Matches: 0, bytes: 0
node 1 permit:
if-match acl 3999
Matches: 0, bytes: 0
node 2 permit:
if-match acl 2000
apply next-hop 1000::1
Matches: 0, bytes: 0
node 5 permit:
if-match acl 3101
apply next-hop 1000::1
Matches: 0, bytes: 0
Total matches: 0, total bytes: 0
Table 3 Command output
Field
Policy based routing information
for interface XXXX
node 0 deny
node 2 permit
if-match acl
apply next-hop
ipv6 policy-based-route
: Specifies the slot number of the device, which is fixed at 1.
Description
IPv6 PBR configuration and statistics on the interface.
This field displays failed in brackets if none of the nodes in the policy
has been successfully issued to the driver.
Match mode of the node, permit or deny.
If a node fails to be issued to the driver, the command displays the
cause in brackets, which include:
•
•
Compares IPv6 packets with the IPv6 ACL.
Specifies a next hop for permitted IPv6 packets.
interface
: Specifies an interface by its type and number.
not support—The device does not support the match criteria
configured on the node.
no resource—No sufficient resources (for example, ACLs) are
available for the node.
7
interface-type