H3C S6550X-HI Series Command Reference Manual page 1913

Table 5 Command output
Field
Neighbor Address
Interface
Version
Last update
display ripng route
Use
display ripng route
Syntax
display ripng process-id route [ ipv6-address prefix-length [ verbose ] |
peer ipv6-address | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
ipv6-address prefix-length
specifies an IPv6 address. The
0 to 128.
: Displays all routing information for the specified destination IPv6 address. If you do not
verbose
specify this keyword, the command displays only optimal RIPng routes with the specified destination
IPv6 address.
peer ipv6-address
statistics
number of routes learned from each neighbor.
Examples
# Display routing information for RIPng process 1.
<Sysname> display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect, D – Direct
----------------------------------------------------------------
Peer FE80::20C:29FF:FED4:7171 on Vlan-interface100
Destination 4::4/128,
via FE80::20C:29FF:FED4:7171, cost 1, tag 0, AOF, 5 secs
Local route
Destination 3::3/128,
via ::, cost 0, tag 0, DOF
Destination 6::/64,
to display all RIPng routes for a RIPng process.
: Specifies a RIPng process by its ID in the range of 1 to 65535.
prefix-length
: Specifies a neighbor by its IPv6 address.
: Displays routing information statistics, including total number of routes and the
O - Optimal, F - Flush to RIB
Description
Link-local address of a neighbor interface.
Name of a neighbor interface.
Version of RIPng that a neighbor runs.
Time elapsed since the most recent update.
: Specifies an IPv6 address. The
argument specifies a prefix length in the range of
7
argument
ipv6-address