H3C S6550X-HI Series Command Reference Manual page 2243

display ipsec transform-set
Use
display ipsec transform-set
Syntax
display ipsec transform-set [ transform-set-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
transform-set-name
1 to 63 characters.
Usage guidelines
If you do not specify an IPsec transform set, this command displays information about all IPsec
transform sets.
Examples
# Display information about all IPsec transform sets.
<Sysname> display ipsec transform-set
IPsec transform set: mytransform
State: incomplete
Encapsulation mode: tunnel
ESN: Enabled
PFS:
Transform: ESP
IPsec transform set: completeTransform
State: complete
Encapsulation mode: transport
ESN: Enabled
PFS:
Transform: AH-ESP
AH protocol:
Integrity: SHA1
ESP protocol:
Integrity: SHA1
Encryption: AES-CBC-128
Table 7 Command output
Field
IPsec transform set
State
Encapsulation mode
ESN
to display information about IPsec transform sets.
: Specifies an IPsec transform set by its name, a case-insensitive string of
Description
Name of the IPsec transform set.
Whether the IPsec transform set is complete.
Encapsulation mode used by the IPsec transform set: transport or tunnel.
Whether Extended Sequence Number (ESN) is enabled.
18