H3C S6550X-HI Series Command Reference Manual page 1946

Field
End.X SID deletion delay
Calculation trigger type
Current calculation type
Current calculation phase
Redistribute timer
Description
End.X SID deletion delay information:
•
State—End.X SID deletion delay state.
•
Delay time——End.X SID deletion delay timer in
seconds.
Route calculation trigger type:
•
Full—Calculation of all routes is triggered.
•
Area topology change—Topology change in an area.
•
Intra router change—Incremental intra-area route
change.
•
ASBR change—Incremental ASBR route change.
•
Full IP prefix—Calculation of all IP prefixes is
triggered.
•
Full intra AS—Calculation of all intra-AS prefixes is
triggered.
•
Inc intra AS—Calculation of incremental intra-AS
prefixes is triggered.
•
Full inter AS—Calculation of all AS-external prefixes
is triggered.
•
Inc inter AS—Calculation of incremental AS-external
prefixes is triggered.
•
Nexthop calculation—Calculation of next hops is
triggered.
•
N/A—Route calculation is not triggered.
Current route calculation type:
•
SPF calculation.
•
Intra router calculation—Intra-area route calculation.
•
ASBR calculation—Inter-area ASBR route
calculation.
•
Inc intra router—Incremental intra-area route
calculation.
•
Inc ASBR calculation—Incremental inter-area ASBR
route calculation.
•
Full intra AS—Calculation of all intra-AS prefixes.
•
Inc intra AS—Calculation of incremental intra-AS
prefixes.
•
Full inter AS—Calculation of all AS-external prefixes.
•
Inc inter AS—Calculation of incremental AS-external
prefixes.
•
N/A—Route calculation is not triggered.
Current route calculation phase:
•
Calculation area topology—Calculating area
topology.
•
Calculation router—Calculating routes on routers.
•
Calculation intra AS—Calculating intra-AS routes.
•
Calculation ASBR—Calculating routes on ASBRs.
•
Calculation inter AS—Calculating AS-external
routes.
•
Calculation end—Ending phase of calculation.
•
N/A—Route calculation is not triggered.
Route redistribution timer status: on or off.
12