H3C S6550X-HI Series Command Reference Manual page 2252

ikev2-profile
Use
ikev2-profile
template.
Use
undo ikev2-profile
Syntax
ikev2-profile profile-name
undo ikev2-profile
Default
No IKEv2 profile is specified.
Views
IPsec policy view
IPsec policy template view
IPsec profile view
Predefined user roles
network-admin
Parameters
profile-name
characters.
Usage guidelines
The IKEv2 profile specified for an IPsec policy, IPsec profile, or IPsec policy template defines the
parameters used for IKEv2 negotiation.
You can specify only one IKEv2 profile for an IPsec policy, IPsec profile, or IPsec policy template. On
the initiator, an IKEv2 profile is required. On the responder, an IKEv2 profile is optional. If you do not
specify an IKEv2 profile, the responder can use any IKEv2 profile for negotiation.
Examples
# Specify IKEv2 profile profile1 for IPsec policy policy1.
<Sysname> system-view
[Sysname] ipsec policy policy1 10 isakmp
[Sysname-ipsec-policy-isakmp-policy1-10] ikev2-profile profile1
Related commands
display ipsec ipv6-policy
display ipsec policy
ikev2 profile
ipsec { ipv6-policy | policy }
Use
ipsec { ipv6-policy | policy }
enter the view of an existing IPsec policy entry.
Use
undo ipsec { ipv6-policy | policy }
Syntax
ipsec { ipv6-policy | policy } policy-name seq-number [ isakmp | manual ]
to specify an IKEv2 profile for an IPsec policy, IPsec profile, or IPsec policy
to restore the default.
: Specifies an IKEv2 profile by its name, a case-insensitive string of 1 to 63
to create an IPsec policy entry and enter its view, or
to delete an IPsec policy.
27