H3C S6550X-HI Series Command Reference Manual page 2070

Parameters
rd-list-number
represents the number of the RD list, in the range of 1 to 65535. If you do not specify an RD list, this
command displays information about all RD lists.
Examples
# Display information about all RD lists.
<Sysname> display ip rd-list
Route Distinguisher List Number 1
index: 1
Route Distinguisher List Number 2
index: 2
Table 4 Command output
Field
Route Distinguisher List Number
index
Permit
Related commands
ip rd-list
display route tag-list
Use
display route tag-list
Syntax
display route tag-list [ tag-list-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
tag-list-number
specify this argument, the command displays information about all tag lists.
Examples
# Display information about tag list 1.
<Sysname> display route tag-list 1
Tag list 1
Index: 1
Index: 2
: Displays information about an RD list. The
Permit 1.1.1.1:1 2.2.2.2:* 100:1 200:*
Deny 1:1 2:2
Description
RD list number.
Index of the RD list item.
Match mode:
•
Permit.
•
Deny.
to display tag list information.
: Specifies a tag list by its number in the range of 1 to 65535. If you do not
Mode: Permit
Mode: Permit
Tag value: 1 2 3
Tag value: 6 7 8
18
argument
rd-list-number