H3C S6550X-HI Series Command Reference Manual page 1389

suppress-fa
Type-5 LSAs.
translate-always
only on an NSSA ABR.
translate-ignore-checking-backbone
backbone area during the translator election in the NSSA area.
translate-never
on an NSSA ABR.
translator-stability-interval value
During the interval, the translator can maintain its translating capability after another device becomes
the new translator. The
defaults to 0. A value of 0 means the translator does not maintain its translating capability when a
new translator arises.
Usage guidelines
All routers attached to an NSSA area must be configured with the
If you specify the
also specify the keyword for other ABRs in the NSSA area. This ensures that a translator can be
elected among the ABRs.
Examples
# Configure Area 1 as an NSSA area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] nssa
Related commands
default-cost
opaque-capability enable
Use
opaque-capability enable
Use
undo opaque-capability
Syntax
opaque-capability enable
undo opaque-capability
Default
The feature is enabled.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
After the opaque LSA advertisement and reception capability is enabled, OSPF can receive and
advertise Type-9, Type-10, and Type-11 opaque LSAs.
: Suppresses the forwarding address in the Type-7 LSAs from being placed in the
: Always translates Type-7 LSAs to Type-5 LSAs. This keyword takes effect
: Never translates Type-7 LSAs to Type-5 LSAs. This keyword takes effect only
argument is the stability interval in the range of 0 to 900 seconds and
value
translate-ignore-checking-backbone
(OSPF area view)
to disable opaque LSA advertisement and reception.
: Ignores checking for FULL state neighbors in the
: Specifies the stability interval of the translator.
to enable opaque LSA advertisement and reception.
101
command in area view.
nssa
keyword for an ABR, you must