H3C S6550X-HI Series Command Reference Manual page 2310

[Sysname-ike-profile-1] exchange-mode main
Related commands
display ike proposal
ike address-group
Use i
ke address-group
remote peers.
Use
undo ike address-group
Syntax
i
ke address-group group-name start-ipv4-address end-ipv4-address [ mask |
mask-length ]
i
undo ke address-group group-name
Default
No IKE IPv4 address pools exist.
Views
System view
Predefined user roles
network-admin
Parameters
group-name
characters.
start-ipv4-address end-ipv4-address
start-ipv4-address
argument specifies the end IPv4 address.
: Specifies the IPv4 address mask.
mask
mask-length
Usage guidelines
An IKE IPv4 address pool can contain a maximum of 8192 IPv4 addresses.
To modify or delete an address pool, you must delete all IKE SAs and IPsec SAs. Otherwise, the
assigned IPv4 addresses might not be reclaimed.
Examples
# Configure an IKE IPv4 address pool with name ipv4group, address range 1.1.1.1 to 1.1.1.2, and
mask 255.255.255.0.
<Sysname> system-view
[Sysname] ike address-group ipv4group 1.1.1.1 1.1.1.2 255.255.255.0
# Configure an IKE IPv4 address pool with name ipv4group, address range 1.1.1.1 to 1.1.1.2, and
mask length 32.
<Sysname> system-view
[Sysname] ike address-group ipv4group 1.1.1.1 1.1.1.2 32
Related commands
aaa authorization
to configure an IKE IPv4 address pool for assigning IPv4 addresses to
: Specifies a name for the IKE IPv4 address pool, a case-insensitive string of 1 to 63
argument specifies the start IPv4 address. The
: Specifies the length of the IPv4 address mask.
to delete an IKE IPv4 address pool.
: Specifies an IPv4 address range. The
16
end-ipv4-address