H3C S6550X-HI Series Command Reference Manual page 2007

no-summary
NSSA area and to not advertise other summary LSAs into the area. The area is a totally NSSA area.
translate-always
only on an NSSA ABR.
translate-never
on an NSSA ABR.
suppress-fa
Type-5 LSAs.
translator-stability-interval value
During the interval, the translator can maintain its translating capability after another device becomes
the new translator. The
default interval is 0. A value of 0 means the translator does not maintain its translating capability
when a new translator arises.
Usage guidelines
All routers attached to an NSSA area must be configured with the
Examples
# Configure Area 1 as an NSSA area.
<Sysname> system-view
[Sysname] ospfv3 120
[Sysname-ospfv3-120] area 1
[Sysname-ospfv3-120-area-0.0.0.1] nssa
Related commands
default-cost
ospfv3
Use
ospfv3
Use
undo ospfv3
Syntax
ospfv3 [ process-id | vpn-instance vpn-instance-name ] *
undo ospfv3 [ process-id ]
Default
No OSPFv3 process is enabled.
Views
System view
Predefined user roles
network-admin
Parameters
process-id
process ID is 1.
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If you do not specify this option, the OSPFv3 process runs
on the public network.
: Used only on an ABR to advertise a default route in a Type-3 summary LSA into the
: Always translates Type-7 LSAs to Type-5 LSAs. This keyword takes effect
: Never translates Type-7 LSAs to Type-5 LSAs. This keyword takes effect only
: Suppresses the forwarding address in the Type-7 LSAs from being placed in the
argument is the stability interval in the range of 0 to 900 seconds. The
value
to enable an OSPFv3 process and enter OSPFv3 view.
to disable an OSPFv3 process.
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. The default
: Specifies the stability interval of the translator.
: Specifies an MPLS L3VPN instance by its name, a
73
command in area view.
nssa