H3C S6550X-HI Series Command Reference Manual page 2064

Syntax
apply qos-local-id { local-id-value | clear }
undo apply qos-local-id
Default
No local QoS ID is set.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
local-id-value
: Clears the local QoS ID of matching routes.
clear
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a local QoS ID of 100 for BGP
routes matching extended community list 100.
<Sysname> system-view
[Sysname] ip extcommunity-list 100 permit rt 100:100
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match extcommunity 100
[Sysname-route-policy-policy1-10] apply qos-local-id 100
apply tag
Use
apply tag
Use
undo apply tag
Syntax
apply tag tag-value
undo apply tag
Default
No routing tag is set for IGP routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
tag-value
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a tag of 100 for IGP routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] apply tag 100
: Specifies a local QoS ID in the range of 1 to 4095.
to set a tag for IGP routes.
to restore the default.
: Specifies the tag value in the range of 0 to 4294967295.
12