H3C S6550X-HI Series Command Reference Manual page 2088

Examples
# Prevent all routes from passing a routing policy that does not exist.
<Sysname> system-view
[Sysname] route-policy non-exist-deny
IPv4 routing policy commands
apply fast-reroute
Use
apply fast-reroute
Use
undo apply fast-reroute
Syntax
apply fast-reroute { backup-interface interface-type interface-number
[ backup-nexthop ip-address ] | backup-nexthop ip-address }
undo apply fast-reroute
Default
No backup link for FRR is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
backup-interface interface-type interface-number
interface by its type and number. If the specified interface is a non-P2P interface, you must also
specify a backup next hop. Non-P2P interfaces include NBMA and broadcast interfaces.
backup-nexthop ip-address
Examples
# Configure node 10 of routing policy policy1 to set the backup output interface VLAN-interface 1
and backup next hop 193.1.1.8 for the route destined for 100.1.1.0/24.
<Sysname> system-view
[Sysname] ip prefix-list abc index 10 permit 100.1.1.0 24
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ip address prefix-list abc
[Sysname-route-policy-policy1-10] apply fast-reroute backup-interface vlan-interface 1
backup-nexthop 193.1.1.8
apply ip-address next-hop
Use
apply ip-address next-hop
Use
undo apply ip-address next-hop
Syntax
apply ip-address
vpn-instance-name ]
to set a backup link for fast route (FRR).
to restore the default.
: Specifies a backup next hop.
to set a next hop for IPv4 routes.
to restore the default.
next-hop ip-address
36
: Specifies a backup output
[ public | vpn-instance