H3C S6550X-HI Series Command Reference Manual page 2320

Related commands
local-identity
ike identity
inside-vpn
Use
inside-vpn
Use
undo inside-vpn
Syntax
inside-vpn vpn-instance vpn-instance-name
undo inside-vpn
Default
No inside VPN instance is specified for an IKE profile. The device forwards protected data to the
VPN instance where the interface that receives the data resides.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name
forwards protected data. The
a case-sensitive string of 1 to 31 characters.
Usage guidelines
This command determines where the device should forward received IPsec protected data. If you
configure this command, the device looks for a route in the specified VPN instance to forward the
data. If you do not configure this command, the device looks for a route in the VPN instance where
the receiving interface resides to forward the data.
Examples
# Specify inside VPN instance vpn1 for IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] inside-vpn vpn-instance vpn1
keychain
Use
keychain
Use
undo keychain
Syntax
keychain keychain-name
undo keychain keychain-name
Default
No IKE keychain is specified for preshared key authentication.
to specify an inside VPN instance.
to restore the default.
vpn-instance-name
to specify an IKE keychain for preshared key authentication.
to remove an IKE keychain.
: Specifies the MPLS L3VPN instance to which the device
argument represents the VPN instance name,
26