H3C S6550X-HI Series Command Reference Manual page 1947

Field
Redistribute schedule type
Redistribute route count
Process reset state
Current reset type
Next reset type
Reset prepare message replied
Reset process message replied
Reset phase of module
Description
Route redistribution scheduling type:
•
RIB—Redistribute routes through the RIB table.
•
Self—Redistribute routes through the routing table.
•
N/A—Route redistribution is not triggered.
Number of redistributed routes.
Process reset state:
•
N/A—The process is not reset.
•
Under reset—The process is in the reset progress.
•
Under RIB smooth—The process is synchronizing
RIB routes.
Current process reset type:
•
N/A—The process is not reset.
•
GR quit—Normal reset when GR quits abnormally.
•
Delete—Delete OSPFv3 process.
•
Undo router-id—Delete router ID.
•
Set router-id—Set router ID.
Next process reset type:
•
N/A—The process is not reset.
•
GR quit—Normal reset when GR quits abnormally.
•
Delete—Delete OSPFv3 process.
•
Undo router-id—Delete router ID.
•
Set router-id—Set router ID.
Modules that reply reset prepare messages:
•
P—Neighbor maintenance module.
•
S—LSDB synchronization module.
•
C—Route calculation module.
•
R—Route redistribution module.
Modules that reply reset process messages:
•
P—Neighbor maintenance module.
•
S—LSDB synchronization module.
•
C—Route calculation module.
•
R—Route redistribution module.
Reset phase of each module:
•
LSDB synchronization (S) module:
N/A—Not reset.

Delete ASE—Delete all ASE LSAs.

Delete area LSA—Delete LSAs from an area.

Delete area IF—Delete interfaces from an area.

•
Route calculation (C) module:
N/A—Not reset.

Delete topology—Delete area topology.

Delete router—Delete routes of routers.

Delete intra AS—Delete intra-AS routes

Delete inter AS—Delete AS-external routes.

Delete ASBR—Delete ASBR routes.

•
Route redistribution (R) module:
N/A—Not reset.

Delete import—Delete redistributed routes.

13