H3C S6550X-HI Series Command Reference Manual page 1908

Usage guidelines
When you use the
without specifying a metric, the metric specified by the
Examples
# Configure a default metric of 2 for redistributed routes.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] default cost 2
Related commands
import-route
display ripng
Use
display ripng
Syntax
display ripng [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
this argument, the command displays information about all RIPng processes.
Examples
# Display state and configuration information for all configured RIPng processes.
<Sysname> display ripng
Public VPN-instance name:
RIPng process: 1
Preference: 100
Fast-reroute:
Checkzero: Enabled
Default cost: 0
Maximum number of load balanced routes: 6
Update time
Suppress time :
Update output delay:
Graceful-restart interval:
Triggered Interval : 5 50 200
Number of periodic updates sent: 256
Number of triggered updates sent: 0
import-route
to display state and configuration information for a RIPng process.
: Specifies a RIPng process by its ID in the range of 1 to 65535. If you do not specify
Routing policy: abc
: 30 secs
120 secs
command to redistribute routes from another routing protocol
default cost
Timeout time
Garbage-collect time :
20(ms) Output count:
60 secs
2
command applies.
: 180 secs
120 secs
3