H3C S6550X-HI Series Command Reference Manual page 1914

via ::, cost 0, tag 0, DOF
# Display information about routes with the specified prefix for RIPng process 1.
<Sysname> display ripng 1 route 3::3 128 verbose
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect, D – Direct
O - Optimal, F - Flush to RIB
----------------------------------------------------------------
Peer FE80::4283:59FF:FE97:205 on Vlan-interface100
Destination 3::3/128,
via FE80::4283:59FF:FE97:205, cost 1, tag 0, AOF, 28 secs
Table 6 Command output
Field
A–Aging
S–Suppressed
G–Garbage-collect
D–Direct
Local route
O - Optimal
F - Flush to RIB
Peer
Destination
via
cost
tag
secs
# Display routing information statistics for RIPng process 1.
<Sysname> display ripng 1 route statistics
Peer
FE80::20C:29FF:FED4:7171
Local
total
Table 7 Command output
Field
Peer
Optimal
Aging
Garbage
Local
total
Description
The route is in aging state.
The route is in suppressed state.
The route is in Garbage-collect state.
The route is a direct route.
The route is a locally generated direct route.
The route is an optimal route.
The route has been flushed to the RIB.
Neighbor connected to the interface.
IPv6 destination address.
Next hop IPv6 address.
Routing metric value.
Route tag.
Time a route entry has stayed in the current state.
Description
IPv6 address of the neighbor.
Number of optimal routes.
Number of routes in aging state.
Number of routes in Garbage-collection state.
Total number of locally generated direct route.
Total number of routes learned from RIPng neighbors.
8
Optimal/Aging Garbage
1/2 0
2/0 0
3/2 0