H3C S6550X-HI Series Command Reference Manual page 2018

Use
undo ospfv3 timer hello
Syntax
ospfv3 timer hello seconds [ instance instance-id ]
undo ospfv3 timer hello [ instance instance-id ]
Default
The hello interval is 10 seconds for P2P and broadcast interfaces, and is 30 seconds for P2MP or
NBMA interfaces.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies the hello interval in the range of 1 to 65535 seconds.
seconds
instance instance-id
Usage guidelines
The shorter the hello interval is, the faster the topology converges and the more resources are
consumed. Make sure the hello interval on two neighboring interfaces is the same.
Examples
# Set the hello interval to 20 seconds for VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 timer hello 20
Related commands
ospfv3 timer dead
ospfv3 timer poll
Use
ospfv3 timer poll
Use
undo ospfv3 timer poll
Syntax
ospfv3 timer poll seconds [ instance instance-id ]
undo ospfv3 timer poll [ instance instance-id ]
Default
The poll interval is 120 seconds on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies the poll interval in the range of 1 to 65535 seconds.
seconds
to remove the configuration.
: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
to set the poll interval on an NBMA interface.
to remove the configuration.
84