H3C S6550X-HI Series Command Reference Manual page 2163

Syntax
display traffic behavior user-defined [ behavior-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
user-defined
behavior-name
you do not specify a traffic behavior, this command displays all traffic behaviors.
Examples
# Display all user-defined traffic behaviors.
<Sysname> display traffic behavior user-defined
User-defined behavior information:
Behavior: 1 (ID 100)
Marking:
Remark dscp 3
Committed Access Rate:
CIR 112 (kbps), CBS 5120 (Bytes), EBS 512 (Bytes)
Green action
Yellow action : pass
Red action
Behavior: 2 (ID 101)
Accounting enable: Packet
Filter enable: Permit
Redirecting:
Redirect to the CPU
Behavior: 3 (ID 102)
-none-
Table 3 Command output
Field
Behavior
Marking
Remark dscp
Committed Access Rate
Green action
Yellow action
: Specifies user-defined traffic behaviors.
: Specifies a behavior by its name, a case-sensitive string of 1 to 31 characters. If
: pass
: discard
Description
Name and contents of a traffic behavior.
Information about priority marking.
Action of setting the DSCP value for packets.
Information about the CAR action.
Action to take on green packets.
Action to take on yellow packets.
9