H3C S6550X-HI Series Command Reference Manual page 2065

apply traffic-index
Use
apply traffic-index
Use
undo apply traffic-index
Syntax
apply traffic-index { value | clear }
undo apply traffic-index
Default
No traffic index is set for BGP routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
: Specifies the traffic index in the range of 1 to 64.
value
: Clear the traffic index of BGP routes.
clear
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a traffic index of 6 for BGP
routes matching extended community list 100.
<Sysname> system-view
[Sysname] ip extcommunity-list 100 permit rt 100:100
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match extcommunity 100
[Sysname-route-policy-policy1-10] apply traffic-index 6
continue
Use
continue
Use undo continue
Syntax
continue [ node-number ]
undo continue
Default
No next node is specified.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
node-number
to set a traffic index for BGP routes.
to specify the next node to be matched.
to restore the default.
: Specifies the routing policy node number in the range of 0 to 65535.
to restore the default.
13