H3C S6550X-HI Series Command Reference Manual page 1926

Syntax
ripng ipsec-profile profile-name
undo ripng ipsec-profile
Default
No IPsec profile is applied to a RIPng interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
profile-name
characters.
Usage guidelines
To configure an IPsec profile, see IPsec in Security Configuration Guide.
Examples
# Apply IPsec profile profile001 to VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng ipsec-profile profile001
ripng metricin
Use
ripng metricin
Use
undo ripng metricin
Syntax
ripng metricin value
undo ripng metricin
Default
The additional metric of an inbound route is 0.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Adds an additional metric to inbound routes, in the range of 0 to 16.
value
Examples
# Configure VLAN-interface 100 to add a metric of 12 to inbound RIPng routes.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricin 12
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
to configure an interface to add a metric to inbound RIPng routes.
to restore the default.
20